Smartphone Thermal Management in the On Device AI Era: Why Active Cooling Is Now Required
1.Introduction
2.The Physical Limits of Passive Cooling
3.BESTAR's Active Thermal Expertise
4.Application Scenarios and Terminal Outlook
5.Conclusion
Introduction: The Thermal Challenge of On Device AI
Smartphones are entering a new computing era. On device large language models, real time AI image generation, and complex AI agents are changing the workload pattern inside the phone. In the past, heavy computing came in short bursts. A user opened a game, played for a while, then closed it. The chip could rest and cool down between bursts.
This is no longer the case. AI features run continuously in the background. Agents continually search for context. AI processed frames to produce videos on cameras for every frame. Voice assistants never go to sleep. This implies that the SoC, NPU and GPU are now subjected to heavy loads and are operating for extended periods of time, rather than for brief moments. The transition poses a serious thermal management challenge for smart phones.
Three pain points define this new challenge.
Firstly, SoC thermal throttling. If the chip's clock speed super-heats for extended periods, it must decrease its speed in order to protect itself. This causes AI inference delay and dropped frames during gaming. Users feel this as lag, stutter, or slow response from AI features.
The second is skin temperature rise. As the heat generated by the phone, increasingly accumulates inside the phone behind the glass or metal back cover. If the surface becomes too hot it will be uncomfortable or possibly unsafe to hold. Every phone has a T Skin limit, a maximum safe surface temperature. AI workloads push devices closer to this limit more often than before.
The third is combined 5G and RF heating. High speed data transfer and AI computing now happen at the same time. This creates overlapping heat sources inside a very small space. The RF module and the SoC both generate heat in the same region, and the combined effect is harder to manage than either one alone.
The core argument of this article is simple. Traditional passive cooling, meaning graphite sheets and vapor chamber, can no longer keep up with the sustained heat load of on device AI. Micro active cooling, including piezoelectric air cooling and micro liquid cooling, is becoming the key solution.
BESTAR has built deep engineering experience in micro active cooling, covering both piezoelectric fan cooling and micro liquid cooling systems designed specifically for smartphones. This blog explains why passive cooling has hit its physical limit, and how active cooling solves the problem.
The Physical Limits of Passive Cooling
To understand why active cooling matters, it helps to separate two different jobs: spreading heat and removing heat.
Graphite sheets and vapor chambers are very good at spreading heat. They take a hot spot from the chip and flatten it across a wider area of the phone body. This is useful, but it is not the same as actually removing heat from the device. Spreading heat only moves the problem to a bigger surface. It does not send the heat out into the air.
This is where the physical limit shows up. Without active airflow or liquid circulation, the boundary layer between the phone surface and the surrounding air stays almost still. Heat transfer through this boundary layer is slow and weak. Engineers call this the thermal boundary layer limit. No matter how well the graphite or vapor chamber spreads heat internally, the final step, moving heat out into the air, stays inefficient. Under a short burst workload this is not a big problem. Under sustained AI workload, heat keeps arriving faster than the boundary layer can release it, and the phone slowly heats up until it hits thermal runaway behavior.
There is also a space problem. Inside a modern smartphone, the battery keeps getting bigger to support all day use. Foldable phones need a hinge mechanism that takes up internal volume. Large sensor camera modules take more room than before. All of this competes for the same limited space that a vapor chamber would need to grow larger. Engineers cannot simply make the vapor chamber bigger to solve the heat problem. The physical space is already full.

BESTAR's Active Thermal Expertise: Solving Four Core Pain Points
BESTAR approaches smartphone thermal management from an active cooling angle, targeting the specific pain points described above.
Solving SoC throttling and sustained heat. BESTAR uses micro piezoelectric fans and micro liquid cooling technology, placed directly over the SoC core area, to provide targeted and strong heat removal. This lowers the peak chip temperature and helps keep AI tasks and long gaming sessions running at full frame rate, without forcing the chip to slow down.
Suppressing 5G and RF hot spots. The RF front end and 5G module sit in a narrow, crowded space. BESTAR provides ultra thin active cooling channels, at sub millimeter thickness, built specifically for these tight spaces. This prevents local heat buildup that would otherwise hurt data speed and system stability.
Managing skin temperature. By creating active heat convection and pulling heat away efficiently, BESTAR breaks through the boundary layer limit described earlier. This allows the phone to keep releasing full chip performance while keeping the areas users actually hold at a comfortable temperature.
Engineering experience and miniaturization. BESTAR has years of experience in precision piezoelectric components and micro actuator drive technology. This background allowed the company to solve the hardest engineering constraints for active cooling inside a phone: total thickness under 2mm, zero mechanical noise, low power consumption, and strong shock resistance. These are not easy targets. Many active cooling concepts fail here, either because they are too thick, too loud, or too fragile for daily phone use. BESTAR's engineering background in fine mechanical structures is what makes a workable, mass producible solution possible.
BESTAR’s technical capabilities are also built on long-term industry collaboration and extensive engineering practice. Over the years, the company has continued to engage in technical exchanges and collaborative innovation with universities, research institutions, and leading industry enterprises, while participating in a range of technical standards, product validation programs, and industrialization projects. By integrating external research resources with its own R&D, process engineering, testing, and manufacturing systems, BESTAR has gradually developed comprehensive capabilities spanning materials, devices, drive technologies, testing and validation, and mass-production transition. This long-term accumulation enables the company to respond more efficiently to emerging application needs and accelerate the path from technical concepts and engineering validation to manufacturable solutions.
Application Scenarios and Terminal Outlook
AI flagship phones and foldable phones. Active cooling can be placed directly at the folding hinge area and around the dense AI compute chip region. This supports a thin, comfortable hold while still delivering high sustained compute output.
Gaming phones and high load imaging devices. Continuous 4K and 8K video recording, real time AI rendering, and high frame rate gaming all need stable, sustained thermal management. Active cooling helps avoid the common failure modes of screen brightness reduction and frame stutter that come from thermal throttling.
As AI features expand across more phone tiers, not just flagship models, smartphone thermal management will need to scale down in cost and size while keeping the same active cooling performance. BESTAR is already working on this direction.
Conclusion
On device AI is redefining smartphone hardware architecture from the inside out. Thermal technology is no longer a background component. It is now a direct condition for how much compute performance a phone can actually deliver to the user.
The industry is moving from passive heat spreading toward micro active cooling. BESTAR, with strong engineering depth in piezoelectric and micro drive technology, is providing a real thermal management engine for the next generation of AI phones.
Hardware and thermal management engineering teams working on next generation AI flagship phones, foldable phones, or high performance terminals are welcome to contact the BESTAR technical team. BESTAR offers technical evaluation and sample support for micro active cooling solutions, including piezoelectric air cooling and micro liquid cooling systems built for real smartphone constraints.


